Lift parts guide
How to identify the right lift door roller
Worn door rollers are one of the most common lift door replacements. Ordering the right one first time saves a second visit, so it helps to know which roller you have and which sizes to measure.
Which roller is it?
- Track (hanger) rollers carry the door hanger along the header track. They take the full weight of the door panel.
- Eccentric (counter) rollers run under the track and stop the hanger lifting off it. The eccentric mounting lets you set the clearance.
- Rope rollers and rope pulleys guide the synchronising rope that makes the door panels move together.
- Gate lock rollers are engaged by the car door coupler so the landing door unlocks at each floor.
- Sill and bottom rollers support and guide the lower part of some door types.
What to measure
- Outer diameter of the roller, in mm.
- Width of the tyre, and whether its running face is flat or grooved.
- The bearing number printed on the bearing, if visible (for example 6301).
- Shaft or stud size: diameter, thread and length, or the bore size.
- The door operator make and model, usually on a plate on the header.
A clear photo of the old roller next to a ruler answers most questions at once.
When to replace
Replace rollers that are noisy, have flat spots, cracked or swollen tyres, or a bearing with noticeable play. Replacing the rollers on a door as a set keeps the door running evenly.
Lift door work must be done by trained lift technicians following the correct isolation and safety procedures.
Find a roller
Browse Fermator, Wittur, Synergy, Selcom / Omega and other door parts, or search the catalogue for rollers.
