Lift parts guide
Guide shoe liners: how to choose the right size
Guide shoes keep the lift car and counterweight aligned on their guide rails. The liner is the replaceable insert inside the shoe that slides on the rail.
What the size means
Liner sizes such as 5 mm, 9 mm, 10 mm and 16 mm refer to the width of the slot that runs on the guide rail blade. The slot must match the thickness of the rail blade: too tight and the shoe binds, too loose and the car rattles.
How to measure
- Measure the thickness of the guide rail blade, the part the shoe runs on, with a vernier caliper.
- Note whether the shoe is on the car or the counterweight, and the shoe type (for example bracket type or hydraulic).
- Note the shoe make if it is marked, and photograph the old liner from the side and the end.
When to replace
Worn liners cause noise, vibration and a rougher ride. Replace them when you see visible wear, a gap between liner and rail, or cracking.
Guide shoe work must be done by trained lift technicians following the correct safety procedures.
Find a liner
See the Guide Shoe & Liner family, or search the catalogue for liners.
